
Roller Conveyor Dustless Shot Blasting Machine has been developed by assembling different parts and systems like blasting chamber, abrasive recycling system, roller conveyor, dust collector, elevator, PLC control system, blast wheel, cleaning chamber and separator. The steel is kept over the conveyor from which it is then carried away to the abrasive stream, where with the help of wheels, the process of sweeping and cleaning is carried into the chamber. Later, the residue dust is collected and the fabricated steel is obtained at the other end of the conveyor. Clients can avail this Roller Conveyor Dustless Shot Blasting Machine from us at marginal rates.
Pros:
Application:
The series belongs to roller conveyor dustless sand blasting machine, mainly used for buildings, bridges and other industries with large I-beam H-beam steel structure such as size pieces of high stress and the elimination of cleaning the surface rust.
Application: Typically used in situations requiring the blasting of large I-beam H-beam steel structure, Angles and flats, steel plates, steel pipes, square tube, box iron at a high rate.
Equipment composition: rollers conveyor, blasting chamber, blast wheel, abrasive recycle system, separator , cleaning chamber, dust collector, PLC control system, elevator, etc.
Design and Sequence of Operations
The Steel are on the roller conveyor and carried into abrasives stream, after blasting by blast wheels, the steel will be sweep and cleaned in chamber, and abrasive reclaimed, dust collected, then steel fabrication sent out to the end conveyor.
There are continuous types.
Technical parameters:
Item | Unit | QH698 | QH6912 | QH6915 | QH6918 |
Effective clean-up width | mm | 800 | 1200 | 1500 | 1800 |
Room size of Entrance | mm | 1000x1700 | 1400x1700 | 1700x1700 | 2000x1800 |
Clean up the length of the workpiece | mm | 1200-12000 | 1200-13000 | 1500-13000 | 2000-13000 |
Clean up size of workpiece | mm | 800x1500 | 1200x1500 | 1500x1500 | 1800x1600 |
Transmission speed(no load speed) | m/min | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 |
Blasting capacity | Kg/min | 8x180 | 8x180 | 8x250 | 8x250 |
First load volume | kg | 4000 | 5000 | 5000 | 6000 |
Ventilation capacity | M3/h | 20000 | 22000 | 25000 | 25000 |
Total power(without dust) | kw | 125 | 130 | 180 | 180 |
Advantage:
![]() |
GUO ZHONG INTERNATIONAL LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |